Справочник Пользователя для Brother MFC 9880

If you’re sending a fax manually (with external telephone) and the line is busy, press Redial/Pause 
and Fax Start to try again. Anytime you want to make a second call to the last number dialled, press 
Redial/Pause and Fax Start to save time.

If you’re sending a fax automatically and the line is busy, the machine will automatically redial up 
to 4 times at 2 minute intervals.

Press Redial/Pause to insert a pause between digits to be dialled.

This is the easiest way to send a fax.

IMPORTANT: Do not pick up the external telephone’s handset.

Insert the document face up in the ADF, or face down on the glass platen.

Enter the fax number using One Touch, Speed Dial, Search or the dial pad.

Press Fax Start.

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending a fax.

Insert the document face up in the ADF, or face down on the glass platen.

Pick up the handset of the external telephone and listen for a dial tone.

Enter the fax number you want to call. (You can dial the number by using One Touch, Speed 
Dial, Search or dial pad.) (See Dialling a Number, page 24.)

When you hear the fax tone, press Fax Start.—OR—If you are using the glass platen, go to 
Step 5.

Press 1, and replace the handset of the external telephone.

If the machine is connected to a PABX, you may need to insert an additional 
number prefix (e.g. “9”) and a “pause” before each fax or telephone number to gain 
access to the outside line. When you press Redial/Pause, a dash “-” will appear 
on the display. By storing a pause, you can create a delay of 3.5 seconds.

Manual transmission does not use memory.