Справочник Пользователя для Brother MFC 9880

Memory Receive must be switched to ON for Faxes to be received into memory. (See Reception into 
Memory, page 31.)

If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using 
Fax Forwarding or Remote Retrieval functions. The screen will indicate when you have a fax stored 
in memory.

Press Menu, 2, 5, 2.

Press 

 or 

 to select ON (or OFF), and press Set when the screen displays your selection.

Press Stop/Exit.

If you’ve set FAX STORAGE to ON, the machine automatically prints fax messages as they are 
received into memory. This is a safety feature in case the power goes out for several days so you 
won’t lose the messages.

When Fax Forwarding and Fax Storage are set to ON, the machine stores the received fax in 
memory, then dials the fax machine phone number you’ve programmed, and forwards the fax 
message. You can change a Fax Forwarding number remotely. (See Changing the Fax Forwarding 
Number, page 52.)

Press Menu, 2, 5, 1.

Press 

 or 

 to select ON (or OFF), and press Set.

The screen prompts you to enter the number of the fax machine where faxes will be forwarded.

Enter the forwarding number (up to 20 digits), and press Set.

Press Stop/Exit.

If there are faxes in memory when you turn the Fax Storage OFF, the screen 
prompts you to erase any faxes in memory.
If you press 1, all fax data is erased and Fax Storage is turned OFF. If the fax data 
in memory has not been printed before, it will be printed first, and then erased. If 
you press 2, data is not erased, and Fax Storage remains ON.

You cannot use Fax Forwarding when “Fax Storage” is set to OFF.

You can also dial into the machine from a remote location to switch this feature on, 
or to change the number you want your faxes forwarding to.