Справочник Пользователя для Sony BVM-20F1U

46

Chapter 2  Menus

The ALIGNMENT menu is used for adjusting
convergence and geometry.

[C]

[C6]

This section describes the functions of the constituent
menus of the SET UP/ALIGNMENT menu.

• The menu numbers (A, B1, C11 and so on) are not

displayed on the monitor screen.

• An arrow (

÷) following the description of an item

or setting in each menu indicates another menu
which appears or an operation which is executed
when you select that menu item or setting. If the
description of an item or setting is not followed by an
arrow, it indicates that selecting the item or setting
finishes the setting operation.

[C6](1/4) ALIGNMENT menu (1/4)
Adjust each item with the UP and DOWN buttons or
PHASE knob.

ROTATION: Compensates for the screen rotation

which occurs when the monitor is installed facing
north or south.

H PHASE: Adjust the horizontal picture position.
V CENTER: Adjust the vertical picture position.
H SIZE: Adjust the width of the picture.
V SIZE: Adjust the height of the picture.
V LIN AMP: Adjust the vertical linearity of the

picture.

V LIN BAL: Adjust the balance of the vertical

linearity of the picture.

VITS BLK: Adjust vertical blanking so that VITS

signals are not visible in the upper part of the
screen.

SUB CONTRAST: Adjust the center value of the

contrast when the image size is changed.
This item cannot be selected when 4:3-NORM is
selected in the SCREEN MODE menu.

INPUT CONFIGURATION  C1

REMOTE  C2

PASSWORD  C3

SYSTEM CONFIGURATION  C4

ON SCREEN SET  C5

ALIGNMENT  C6

EXTEND MENU  C7

ROTATION (1/4)

H PIN (2/4)

V STATIC CON (3/4)

H CV R C (4/4)