Справочник Пользователя для Ariens 911099

GB - 18

Replace oil filter every 100 hours of use or 
every season.

1. Change engine oil.
2. Clean around filter.
3. Turn filter counterclockwise to remove 

4. Apply a thin coat of oil onto seal of new 

filter.

5. Install new filter and hand tighten 

securely.

Use Sten Mix Hi-Temp Grease or equivalent 
on the lube fittings. Order P/N: 00036800 - 3 
pack of 3 oz. cartridges.

Spark plug should be replaced every 100 
hours of operation or each year.
NOTE: Loose spark plug wire terminals can 
cause sparking. Replace terminal if 
damaged.

To prevent overheating, air must circulate 
freely around the cooling fins, cylinder head 
and block.

Every 100 hours of operation or yearly (more 
often if conditions require) remove blower 
housing and clean cooling fins. See engine 
manual for instructions.

Check muffler for debris, cracks, wear, or 
other damage.

Put unit into service position for easy access 
to underneath the deck.

Figure 10

WARNING: HOT SURFACES can 
cause death or serious injury. DO 
NOT TOUCH parts which are hot 
from operation. ALWAYS allow 
parts to cool.

CAUTION: Replace worn-out 
mufflers immediately. Continued 
use could result in fire or explosion.

Lube Fitting

Figure 11

OM1282

CAUTION: AVOID INJURY. Read 
and understand the entire Safety 
section before proceeding.

CAUTION: Avoid fuel spills. Follow 
steps below to help prevent fuel 
spills. If fuel leaks into air cleaner, 
replace air cleaner. ALWAYS clean 
up any spilled fuel.