Справочник Пользователя для Snapper LT145H38FBV

 

 

Should a gradual loss of traction be noticed, it may be 
necessary to adjust the traction drive belt tension. 
Adjust as follows: 
1.  Move tractor to a firm, level surface. 
2.  Turn engine "OFF". Remove key.  
3.  Remove mowing deck. 
4.  Remove the traction drive belt stationary idler 
mounting bolt. See Figure 4.22. 
5.  Move the stationary idler one hole towards left side 
of tractor for more belt tension. 

 

NOTE:  Note the orientation of belt guide and make certain 
it remains in the same orientation after moving idler. 
NOTE:  Should less tension be required move stationary 
idler towards right side of tractor. See Figure 4.22. 

 
6.  Secure stationary idler with mounting bolt. 
7.  Place spark plug wire onto spark plug. Set park 
brake. Start engine. 
8.  Visually inspect traction drive belt for movement. 
When properly adjusted, the traction drive belt should 
not have any movement or rotation with the engine 
running and park brake engaged. 
9.  Should movement be present, readjust traction 
drive belt to release belt tension as described in 
previous instructions.