Справочник Пользователя для Snapper LT145H38FBV

Section 2 - OPERATING INSTRUCTIONS

2.4 STOPPING

2.4.3. STOPPING MOWER BLADE
1. Stop mower blade by moving blade engagement
lever to the "OFF" position. See Figure 2.11.

FIGURE 2.11

WARNING

Once blade is disengaged, it should come to a
complete stop in 5 seconds or less. If the blade
continues to rotate after 5 seconds, the blade brake
must be adjusted. Refer to Section “BLADE BRAKE
ADJUSTMENT” for adjustment procedures or return
machine to dealer for adjustment. DO NOT CONTINUE
to operate mower until blade brake is properly adjusted.

2.4.4.  SETTING PARK BRAKE
1.  Fully depress clutch/brake pedal.
2.  Move park brake lever up into slot. See Figure 2.12.

FIGURE 2.12

2.4.5. RELEASING PARK BRAKE
1. Fully depress clutch/brake pedal. Move park brake
lever “DOWN” to release park brake. Release
clutch/brake pedal. See Figure 2.13.

FIGURE 2.13

2.5. CUTTING HEIGHT ADJUSTMENT

1. Depress lock button on cutting height adjustment
lever. See Figure 2.14.

FIGURE 2.14

2. Raise or lower deck to any of six positions as
desired.

WARNING

DO NOT park machine on slopes.

OFF

BLADE
ENGAGEMENT
LEVER

PUSH PEDAL ALL
THE WAY DOWN

PARK BRAKE
LEVER

MOVE PARK BRAKE
LEVER “UP” TO
ENGAGE PARK BRAKE

CUTTING
HEIGHT
ADJUSTMENT
LEVER

DEPRESS
LOCK BUTTON

HIGHEST CUT

LOWEST CUT

CLUTCH/BRAKE
PEDAL

FULLY DEPRESS
CLUTCH/BRAKE
PEDAL

PARK BRAKE
LEVER