Справочник Пользователя для Troy-Bilt Pro-Line

Stop the engine, allow it to cool and disconnect the spark 

plug wire before working near the belts. 
Remove the two nuts and remove the belt cover. Refer to 

Fig. 6-8 in the Maintenance & Adjustments Section.
Move the reverse clutch belt out of the way. You do not 

need to completely remove the belt. Press the reverse idler 

pulley inward for slack and then slip the bottom half of the 

belt completely off the transmission pulley. Pull the bottom 

half of the belt out of the housing and let it hang off the 

outside of the tiller. See Fig. 7-1.

1.

2.

3.

Disconnect the forward clutch cable from the forward 

clutch idler arm bracket . See Fig. 7-2. Note the hole from 

which you disconnect the cable. It is important that you 

reconnect the cable to the same hole.

Slide the belt off the engine pulley, away from engine, out 

from under the belt guide and completely off the pulley. 

See. Fig. 7-3.

4.

5.