Справочник Пользователя для Sony PFM-500A2WU

30

30

 (EN)

This unit automatically turns off the power after
certain period if there is no input signal from the
RGB1 or RGB2 connectors. (Power saving function)

Press MENU.
The main menu appears on the monitor screen.

Press 

>/. to move the cursor (z) to “CONFIG”

and press ENT.
The CONFIG menu appears on the monitor screen.

Press 

>/. to move the cursor (z) to “POWER

SAVE” and press ENT.
The following menu appears on the monitor
screen.

Press 

>/. to select the period to turn into the

power saving mode.

OFF: The power saving function does not work.
5 m: Turn into the power saving mode after five

minutes if there is no input signal.

10 m: Turn into the power saving mode after 10

minutes if there is no input signal.

The power indicator flashes when the unit is in the
power saving mode.

• Input the sync signal again.
• Press the u switch on the control panel or the

POWER switch on the Remote Commander.

RGB1: When the sync signal is connected to the HD/

COMP IN connector.

RGB2: When the sync signal is connected to the

13th pin of the RGB IN (D-sub 15-pin) connector.

• The power saving function does not work when the

signal is input from the LINE connectors.

• If the sync signal is not connected to the HD/COMP

IN connector, the unit does not turn on even if the
sync signal is input. Be sure to set POWER SAVE to
OFF when only the RGB signal or component signal
is connected.

• If the sync signal is not connected to the 13th pin of

the RGB IN (D-sub 15-pin) connector, the unit does
not turn on even if the sync signal is input. Be sure to
set POWER SAVE to OFF when only the RGB
signal is connected.

M A I N

M E N U

P I C

C O N T R O L

P I C

S I Z E

C O N F I G

M E M O R Y

R E M O T E
S T A T U S

S E L E C T

C A N C E L

ENTER

MENU

P O W E R

S A V E

:

5 m

C O N F I G

E N H A N C E

: H I G H

H

F I L T E R

: A U T O

D I S P L A Y

:

O N

P O W E R

S A V E

:

5 m

L A N G U A G E

S E L E C T

C A N C E L

ENTER

MENU