Справочник Пользователя для 3com 3C16405
DUA1640-5AAA02
Commands
6-11
Initializing the Stack
Initializing the stack causes it to return to its factory default settings.
You may want to do this if the stack has been previously used in a
different part of your network, and its settings are incorrect for its new
environment.
You may want to do this if the stack has been previously used in a
different part of your network, and its settings are incorrect for its new
environment.
CAUTION: Initializing the stack removes all configuration information
including security, resilient links and passwords. However, IP, SLIP and
default router information is retained to ensure you can continue
management communication with the stack over the network.
including security, resilient links and passwords. However, IP, SLIP and
default router information is retained to ensure you can continue
management communication with the stack over the network.
To initialize the stack:
1 At the top-level menu, enter:
system initialize
2 The CLI asks you to confirm the initialize. Enter
y
if you wish to
proceed, or
n
if you want to stop the initialize.
The stack’s passwords return to the default passwords.
Configuring Another
Unit in the Stack
The unit command allows you log on to another unit in the stack
without disconnecting from the current unit.
without disconnecting from the current unit.
To configure another unit:
1 At the top-level menu, enter:
system unit
You are prompted for the unit’s number (note that the command
displays the number of the unit that you are currently configuring):
displays the number of the unit that you are currently configuring):
Select unit (1):
2 Enter the unit’s number.
When you have finished configuring the unit, simply log out to return
to the previous unit.
to the previous unit.