Справочник Пользователя для Polycom (RMX) 1500

Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000

Polycom, Inc.

When SIP registration is not enabled in the conference profile, the RMX's registering to 
SIP Servers will each register with an URL derived from its own signaling address. This 
unique URL replaces the non-unique URL, dummy_tester, used in previous versions.

•

Failed - Registration with the SIP Server failed. 

This may be due to incorrect definition of the SIP server in the IP Network Service, or the 

SIP Server may be down, or any other reason the affects the connection between the 

RMX or the SIP Server to the network. 

•

Registered - the conferencing entity is registered with the SIP Server.

•

Partially Registered - This status is available only in Multiple Networks configuration, 

when the conferencing entity failed to register to all the required Network Services if 

more than one Network Service was selected for Registration.

The Entry Queue can also be used for Ad Hoc conferencing. If the Ad Hoc option is enabled 

for the Entry Queue, when the participant enters the target conference ID the system checks 

whether a conference with that ID is already running on the MCU. If not, the system 

automatically creates a new ongoing conference with that ID. The conference parameters are 

based on the Profile linked to the Entry Queue. As opposed to Meeting Rooms, that are 

predefined conferences saved on the MCU, Ad Hoc conferences are not stored on the MCU. 

Once an Ad Hoc conference is started it becomes an ongoing conference, and it is monitored 

and controlled as any standard ongoing conference.
An external database application can be used for authentication with Ad Hoc conferences. 

The authentication can be done at the Entry Queue level and at the conference level. At the 

Entry Queue level, the MCU queries the external database server whether the participant 

has the right to create a new conference. At the conference level the MCU verifies whether 

the participant can join the conference and if the participant is the conference chairperson. 

The external database can populate certain conference parameters.
For more information about Ad Hoc conferencing, see Appendix D, "Ad Hoc Conferencing and 

Gateway to Polycom® Distributed Media Application™ (DMA™) 7000 enables audio only 

PSTN, ISDN (video endpoints using only their audio channels), SIP and H.323 calls to 

connect to the Polycom DMA 7000 via gateway sessions running on the RMX. Each RMX 

conference acting as a gateway session includes one connection to the endpoint and another 

connection to the DMA. The DMA 7000 enables load balancing and the distribution of 

multipoint calls on up to 10 Polycom RMX media servers.
As part of this solution, the RMX acts as a gateway for the DMA that supports H.323 calls. 

The PSTN, ISDN or SIP endpoint dials the virtual Meeting Room on the DMA via a special 

Entry Queue on the RMX.
For more information, see "Dialing to Polycom® DMA™ 7000” on page