Справочник Пользователя для Polycom (RMX) 1500

Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide 

Polycom, Inc.

Select the IP Network Service to be used with this Gateway. If this is 
not selected the default IP Network Service will be used.

Select this check box to allocate dial-in numbers for ISDN/PSTN 
connections.
To define the first dial-in number using the default ISDN/PSTN 
Network Service, leave the default selection. When the Entry Queue 
is saved on the MCU, the dial-in number will be automatically 
assigned to the Entry Queue. This number is taken from the dial-in 
numbers range in the default ISDN/PSTN Network Service.
Note: Even if ISDN/PSTN is disabled for dial-in, if an ISDN/PSTN 
Network Service is defined in the system, and ISDN and/or PSTN are 
enabled for dialed out, the system will used the default ISDN Network 
Service for dialing out to the target number.

The default Network Service is automatically selected. To select a 
different ISDN/PSTN Network Service in the service list, select the 
name of the Network Service.
Note: If you enable the ISDN/PSTN access, define the dial-in phone 
number ranges and the Use Dial-In Numbers as Prefix Range 
parameters to prevent abuse of the gateway.

Enter the first number in the Dial-in number range to be used for 
dialing into the gateway. This number must be part of the dial-in 
number range defined in the selected ISDN/PSTN Network Service.
This field cannot be left empty. If left empty an error message, Please 
enter the First Dial in Number is displayed.
Length: 0-25 digits.
Note: This number must be numerically smaller than the Last Dial-in 
Number in the range.

Enter the last number in the Dial-in number range to be used for 
dialing into the gateway. This number must be part of the dial-in 
number range defined in the selected ISDN/PSTN Network Service.
This field cannot be left empty. If left empty an error message, Please 
enter the Last Dial in Number is displayed.
Length: 0-25 digits.
Note: This number must be numerically larger than the First Dial-in 
Number in the range.

When selected - Dial-in numbers are used to automatically generate 
the dial string of the destination endpoint or DMA Meeting Room or 
the IP endpoint, skipping the interaction with the Gateway IVR system 
for entering the destination ID. For more details see "Direct Dial-in to 
Endpoints or DMA VMR using Automatically Generated Destination 
Numbers” on page

.

When cleared - The participant must interact with the IVR Service to 
enter the ID of the destination endpoint of the DMA Meeting Room.
Note: If you enable the ISDN/PSTN access, define these numbers or 
the dial-in phone number ranges to prevent abuse of the gateway.