Справочник Пользователя для Vulcan-Hart C24GA10

F35425 (February 2006)

Page 8 of 40

1.

Open the door.

2.

Remove screws from the top and bottom of the

door.

3.

Pull the outer door panel out from the door

housing.

4.

Remove the pins and retaining rings.

5.

Remove the latch assembly from the door.

6.

Reverse procedure to install. Use Loctite 271 to

secure fasteners.

WARNING:  DISCONNECT  THE
ELECTRICAL  POWER  TO  THE
MACHINE  AND  FOLLOW  LOCKOUT /
TAGOUT  PROCEDURES.

1.

Remove compartment right side cover as

outlined under COVERS AND PANELS.

2.

Remove the component being replaced.

3.

Reverse the procedure to install the replacement

component, then check steamer for proper
operation.

C24GA SERIES CONVECTION STEAMERS - REMOVAL AND REPLACEMENT OF PARTS