Руководство Пользователя для Toshiba A9
193
If Something Goes Wrong
Resolving a hardware conflict
1
Click the Safely Remove Hardware icon on the Notification
Area.
Area.
The Safely Remove Hardware screen appears.
2
Click Safely remove for the device you want to swap.
3
Select the item you wish to remove and click OK.
4
Remove the device when told it is safe to do so.
Never swap modules when the computer is in Hibernation or Sleep
mode. This is known as “warm swapping” and is not supported with
this computer. For more information on Hibernation and Sleep
modes see
mode. This is known as “warm swapping” and is not supported with
this computer. For more information on Hibernation and Sleep
modes see
The system does not recognize your PC Card.
Refer to the PC Card documentation.
Removing a malfunctioning card and reinstalling it can correct
many problems.
many problems.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
connection is secure.
Refer to the card’s documentation, which should contain a
troubleshooting section.
troubleshooting section.
Printer problems
This section lists some of the most common printer problems:
The printer will not print.
Check that the printer is connected to a working power outlet,
turned on and ready (on line).
turned on and ready (on line).
Check that the printer has plenty of paper. Some printers will not
start printing when there are just two or three sheets of paper left in
the tray.
start printing when there are just two or three sheets of paper left in
the tray.
Make sure the printer cable is firmly attached to the computer and
the printer.
the printer.
Run the printer’s self-test to check for any problem with the printer
itself.
itself.