Справочник Пользователя для Lexmark X734de
A
DJUST
THE
COLOR
ALIGNMENT
1
Turn the printer off.
2
Load letter- or A4-size paper in the tray.
3
Hold down and while turning the printer on.
4
Release the buttons when the screen with the progress bar appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
The printer performs a power-on sequence, and then the Configuration menu appears.
5
Touch the down arrow until Color Alignment appears.
6
Touch Color Alignment.
7
Touch Color Alignment again.
The color alignment pages print.
The color alignment pages print.
8
Touch the down arrow until Color Alignment appears, and then touch Color Alignment.
9
From the printed sheet, find the straightest of the 20 lines beside the letter A.
10
Touch the left or right arrow to select that number.
11
Repeat steps 9 and 10 to align sets B through L.
12
Touch Back.
13
Touch Exit Config Menu.
Note: If the issue is not resolved, then recalibrate again. If necessary, adjust the color alignment again.
Clipped images
These are possible solutions. Try one or more of the following:
C
HECK
THE
GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
C
HECK
THE
PAPER
SIZE
SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Size setting from the Paper menu.
2
Before sending the job to print, specify the correct size setting:
•
For Windows users, specify the size from Print Properties.
•
For Macintosh users, specify the size from the Page Setup dialog.
Fine horizontal lines appear on color pages
You may notice fine, horizontal lines in photographs or pages with a high concentration of color. This can occur when
the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).
the printer is in Quiet Mode. To fix this, set Quiet Mode to Off (Image/Photo).
Troubleshooting
293