Инструкции По Установке для Bosch ltc-0335-28
26
en | Configuring devices
Bosch Video Management System
Configuration Client | V3 | 2010.07
Configuration Manual
Bosch Sicherheitssysteme GmbH
5.
Click the Name tab to change the display names of the Relays if required.
To add an Allegiant CCL emulation:
1.
Expand ,
click .
The Allegiant CCL Emulation tab is displayed.
2.
Click to check Enable Allegiant CCL Emulation.
3.
Make the required settings.
The Allegiant CCL emulation service is started on the Central Server.
6.4
Configuring an encoder / decoder
To configure an encoder:
Main window >
Devices > Expand
> Expand
> Expand
>
or
Main window >
Devices > Expand
> Expand
>
or
Main window >
Devices >
>
To configure a decoder:
Main window >
Devices > Expand
> Expand
>
To configure an encoder or a decoder:
Make the appropriate settings on the tab pages of the encoder or decoder.
See the Online Help for the
pages for details.
6.5
Configuring a decoder for use with a CCTV keyboard
Main window >
Devices > Expand
> Expand
Perform the following steps to configure a VIP XD decoder that is connected to a CCTV
keyboard.
To configure a decoder:
1.
Click the appropriate decoder which is used for connecting a CCTV keyboard.
2.
Click the Periphery tab.
NOTICE!
You can also perform a scan for ADAM devices (Scan for ADAMs). The IP addresses of the
devices are detected. If available the device type is preselected. You must confirm this
selection.
NOTICE!
IP devices can be connected that do not have all configuration pages that are described here.