Листовка для OEM c-10sw

Скачать
Страница из 2
PACKAGE CONENTS 
ITEM 1 
ITEM 2 
Eight (8) short screws (Item 1) 
and eight (8) longer screws 
(Item 2) 
MB-C10 
Two (2) pairs of steel 
mounting rails 
OEM Systems Co., Inc. 
740 Freeport Boulevard, Suite 106, Sparks, NV 89431  (775) 355-0405 
www.oemsystems.com 
Speaker Mounting Handle 
Grille 
Removal 
Tool 
Four (4)
Speaker 
Mounting 
Screws 
*Grille also included, but not shown 
C-10SW* 
C-10SW & MB-C10 
In-Ceiling Subwoofer System 
Installation Guide 
The MB-C10 combination mounting & pre-construction bracket and the C-10SW 10" woofer 
assembly are packaged and sold separately.  These instructions accompany both. 
The MB-C10 & C-10SW In-Ceiling Subwoofer system has been designed to 
mount directly to 16" OC, 19.2" OC & 24" OC wooden frame construction 
members (ceiling joists and trusses). 
The integrated system weighs approximately 11 pounds, which is much too 
heavy to be suspended overhead in sheetrock especially when you take 
into consideration the punishing excursions the 10" long-throw woofer is 
capable of. 
For the sake of safety, the system is designed such that the entire assembly 
is mounted directly to the structure’s framing members.  It actually re-
enforces the sheetrock by unitizing it, the assembly and the structure’s 
framing together. 
Primarily designed for “new construction”, in some cases it may also be 
retro-fitted into existing construction, which is to say, after the sheetrock is 
in place.  This may be accomplished when access to the “other side” may 
be gained.  The structural mounting bracket may be installed from above 
the sheetrock.