Дополнительное Руководство для Hoshizaki rh1-aac

13

The control module for -AAC models is located on the face of the refrigeration circuit, 
behind the front panel. To open the front panel, swing the bottom of the panel up and allow 
the panel hinges to catch securely on the side panel frames in the locked position; the 
control module can then be accessed. 

1. Settings and Adjustments.

• The cabinet temperature is displayed on the control module. The cabinet temperature is 

displayed in °F only.

• The cabinet temperature is updated every  seconds.
• When the fan, compressor and defrost are initiated, the corresponding indicator lights 

will switch on.

The temperature setpoint is the temperature at which the compressor comes on. For 
refrigerators, the temperature differential for the compressor to turn off is 5°F below the 
setpoint. For freezers, the temperature differential for the compressor to turn off is 6°F 
below the setpoint, If necessary, adjust the setpoint temperature as follows:

1) Press "SET." The display reads: 

) Press "SET." The display reads: 

3) Use the up/down arrows to change the setpoint. For refrigerators, the cabinet 

temperature is adjustable between 37°F and 55°F. The factory default is 39°F. For 
freezers, the cabinet temperature is adjustable between -10°F and 8°F. The factory 
default is -1°F for the FH1-AAC(-HD) and 0°F for the FH-AAC(-HD).

4) Press "SET" to save. If no button is pressed in 15 seconds, the display will return to 

normal, and the setpoint will remain unchanged.

Control Module

Door

Front Panel