Справочник Пользователя для HP ProLiant DL180 G6 X5504 1P 2GB-U 1x500GB SATA 460W PS Server/TV 572832-425

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.

Step 1: Base Configuration (choose one of the following configurable models)

 

Hot Plug Models

 

HP ProLiant DL180 G6 Hot Plug SAS/SATA Rack CTO Chassis

507168-B21

Factory Integrated Model ships with:

 

HP NC362i Integrated Dual Port Gigabit Server Adapter

 

Three available PCI-Express slots:

 

Slot 1: x16 low-profile/half-height slot

 

Slot 2 & 3: x8 full-height/full length

 

NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X
100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in
the server.
NOTE: Optional FL/FH option kit includes: Slot 1: full length/full height slot.

 

One HP SATA Embedded Cable Kit

 

One Highline IEC Power Cord

 

4 Non-Hot Plug Fans

 

Rack (2U), (3.5 in/8.89 cm)

 

Tool-less Fixed Rails

 

Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)

Processors

Quad-Core Processors

Intel® Xeon® processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO Base

NOTE: If 2 processors are desired, select one 508344-L21 and one 508344-B21.

508344-L21

Intel® Xeon® processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2), FIO Base

NOTE: If 2 processors are desired, select one 508343-L21 and one 508343-B21.

508343-L21

Intel® Xeon® processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066,
HT, Turbo 1/1/2/2), FIO Base

NOTE: If 2 processors are desired, select one 508342-L21 and one 508342-B21.

508342-L21

Intel® Xeon® processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO
Base

NOTE: If 2 processors are desired, select one 508341-L21 and one 508341-B21.

508341-L21

QuickSpecs

HP ProLiant DL180 Generation 6

Configuration Information - Factory Integrated Models

DA - 13248   Worldwide QuickSpecs — Version 7 — 7.13.2009

Page 15