Инструкция Товара для GoVideo r6740
12
TV channel setup
Automatic TV channel search
The auto channel search function searches for and stores all
available TV channels from your antenna or basic cable
provider.
available TV channels from your antenna or basic cable
provider.
1. Ensure the antenna is securely connected to
the DVD Recorder.
2. Switch on the TV set and the DVD Recorder.
3. Press [SETUP] to display the “SETUP” menu
then press [
] [] to select “TV TUNER” and
press [
].
4. Press [
] [] to select “Utilities” and press
[
].
5. Press [
] [] to select “START SCAN” and
press [ENTER] to start auto channel search.
6. The auto channel search starts. This proce-
dure may take a few muniutes.
7. When all the TV channels have been found,
press [SETUP] to exit.
Adding or deleting TV channel manually
After auto channel search is complete, you may wish to add or
delete channels manually:
delete channels manually:
1. Press [SETUP] to display the “SETUP” menu
then press [
] [] to select “TV TUNER” and
press [
].
2. Press [
] [] to select “Uilities” and press [].
3. Press [
] [] to select “Add/Delete” and press
[ENTER] to display the add/delete menu.
4. Press [
] [][] [] to select the channel you
want to add or delete and press [ENTER] to
confirm.
Move the cursor to the desired TV channel and press [ENTER] to
add or delete it.
add or delete it.
5. Press [
] [][] [] to select “EXIT”, then
press [ENTER] to save your settings and exit
the add/delete menu.
Fine tuning TV channels manually
After you have performed the automatic channel search you
may want to fine tune certain channels manually:
may want to fine tune certain channels manually:
1. Press [SETUP] to display the “SETUP” menu
then press [
] [] to select “TV TUNER” and
press [
].
2. Press [
][] to select the “FINE” and press
[
].
3. Press [
][] to fine tune the channel signal.
Swapping TV channels manually
This function allows you to manually swap the TV channel order
stored in the DVD Recorder to match the TV channel order
stored in your TV set.
stored in the DVD Recorder to match the TV channel order
stored in your TV set.
1. Press [SETUP] to display the “SETUP” menu
then press [
] [] to select “TV TUNER” and
press [
].
2. Press [
] [] to select “Swap” and press
[ENTER] to display the “SWAP” menu.
3. Select the TV channel to be swapped and
press [ENTER] to mark the TV channel.
4. Press [
] [][] [] to select a new channel
position and press [ENTER] to swap.
5. To swap additional TV channels, repeat step
“3” to complete the settings.
6. Select “EXIT” to save your settings and exit
the “SWAP” menu.