Руководство Пользователя для Lexmark X850e

The degree of smoothness of paper directly affects print quality. If the paper is too rough, the toner does not fuse to the 
paper properly, resulting in poor print quality. If the paper is too smooth, it can cause paper feeding or print quality issues. 
Smoothness needs to be between 100 and 300 Sheffield points; however, smoothness between 150 and 250 Sheffield 
points produces the best print quality.

The amount of moisture in the paper affects both print quality and the ability of the MFP to feed the paper properly. Leave 
the paper in its original wrapper until it is time to use it. This limits the exposure of the paper to moisture changes that can 
degrade its performance. 

Condition paper while it is still in the original wrapper. To condition it, store it in the same environment as the MFP for 24 to 
48 hours before printing to let the paper stabilize in the new conditions. Extend the time several days if the storage or 
transportation environment is very different from the MFP environment. Thick paper may also require a longer conditioning 
period because of the mass of material.

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the 
paper, or grain short, running the width of the paper.

For 60 to 90 g/m

2

 (16 to 24 lb bond) paper, grain long fibers are recommended.

Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a 
high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as 
cotton possess characteristics that can result in degraded paper handling.

The following papers are not recommended for use with the MFP:

Chemically treated papers used to make copies without carbon paper, also known as carbonless papers, 
carbonless copy paper (CCP), or no carbon required (NCR) paper

Preprinted papers with chemicals that may contaminate the MFP

Preprinted papers that can be affected by the temperature in the MFP fuser

Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in., such as 
optical character recognition (OCR) forms

In some cases, you can adjust registration with your software application to successfully print on these forms.

Coated papers (erasable bond), synthetic papers, thermal papers

Rough-edged, rough or heavily textured surface papers or curled papers

Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309

Recycled paper having a weight less than 60 g/m

2

 (16 lb)

Multiple-part forms or documents

Proper paper loading helps prevent jams and ensures trouble-free printing.

To help avoid jams or poor print quality:

Always use new, undamaged paper.

Before loading paper, know the recommended print side of the paper. This information is usually indicated on the 
paper package.