Руководство Пользователя для Lorex l404

067392-++2137438 45 ,-+/+.

Connecting Motion / Alarm Device - Appendix #5

Motion detection and Alarm controls are enabled through the Menu system on the DVR. 
Additional motion sensor devices can be connected to the system (Motion Sensors, Door/
Window Sensors).

A motion detection or sensor unit can 
be used to send a signal to the DVR 
to begin camera viewing on the 
matching Video Channel (when 
enabled in the MENU/ALARM SET 
MODE)

• Example: A Window sensor unit 

has been installed on Alarm 
Block port #4. When this sensor 
is activated, the camera on DIN 
or BNC VIDEO port #4 will 
become active (if enabled in the 
MENU on the DVR)

For the corresponding Menu Pro-
gramming, refer to Page 26.

Installing a Sensor

1.  Connect the GROUND Cable to the 

GND port on the Alarm Block on the 
DVR

2. Connect the SIGNAL Cable to a 

numbered port (1-8) 

To start ALARM RECORDING on a 
DVR unit, refer to the manual for 
your specific DVR product.