Справочник Пользователя для Bosch ra1171 router table

HINT: Applying bar soap or bees wax to the screw
threads will make them easier to install into the panels.

1. With the bumps on the catch plate against the door

surface, attach the metal catch plate (13B) to the
inside of the narrow end of the door with a 5/8

″ lg.

flat-head Phillips wood screw (35). The edge of the
catch plate should be even with the edge of the door
(Fig. 6).

2. Attach the door hinges (12) to the left side panel with

two 5/8

″ lg. flat-head Phillips wood screws (35) on

each hinge (Fig. 7).

3. Attach the magnetic catch (13A) to the inside of the

right side panel using two 5/8

″ lg. flat-head Phillips

wood screws (35) (Fig. 7).

4. Slowly open and close the door, making sure that it

moves freely and does not rub on the base or top, 
does not come in contact with the switch assembly,
and that it latches correctly.

• If the door rubs, make sure the side panels and

switch are assembled correctly.

• If the magnetic catch does not contact the 

catch plate, loosen the screws on the magnetic
catch and reposition it using the slotted holes 
in the catch.

Back Side of Door