Дополнительное Руководство для Lexmark X651DE

These are possible solutions. Try one or more of the following:

Clear any error messages.

Clean the scanner glass with a clean, lint-free cloth dampened

with water.

Increase the resolution of the scan for a higher quality output.

Make sure the quality of the original document is satisfactory.

Make sure the document or photo is loaded facedown on the

scanner glass in the upper left corner.

These are possible solutions. Try one or more of the following:

Make sure the document or photo is loaded facedown on the

scanner glass in the upper left corner.

Make sure the paper size setting matches the paper loaded in

the tray:

From the printer control panel, check the Paper Size setting

from the Paper menu.

Before sending the job to print, specify the correct size

setting:

For Windows users, specify the size from Print

Properties.

For Macintosh users, specify the size from the Page

Setup dialog.

These are possible solutions. Try one or more of the following:

Clear any error messages.

Make sure the printer is plugged in, the power is on, and
Ready appears.

Make sure the network or USB cable is securely connected to

the computer and the printer.

Contact your telecommunications company to verify that your

telephone line is subscribed to the caller ID service.
If your region supports multiple caller ID patterns, you may have

to change the default setting. There are two settings available: FSK

(pattern 1) and DTMF (pattern 2). The availability of these settings

by way of the Fax menu depends on whether your country or

region supports multiple caller ID patterns. Contact your

telecommunications company to determine which pattern or

switch setting to use.

These are possible solutions. Try one or more of the following:

Clear any error messages.

Make sure the printer is plugged in, the power is on, and
Ready appears.

Make sure the cable connections for the following hardware

are secure, if applicable:

Telephone

Handset

Answering machine

Plug a telephone into the wall jack.

Listen for a dial tone.

If you do not hear a dial tone, then plug a different

telephone into the wall jack.

If you still do not hear a dial tone, then plug a telephone

into a different wall jack.

If you hear a dial tone, then connect the printer to that wall

jack.

The fax modem is an analog device. Certain devices can be

connected to the printer so that digital telephone services can

be used.

If you are using an ISDN telephone service, then connect

the printer to an analog telephone port (an R-interface port)

on an ISDN terminal adapter. For more information and to

request an R-interface port, contact your ISDN provider.

If you are using DSL, then connect to a DSL filter or router

that will support analog use. For more information, contact

your DSL provider.

If you are using a PBX telephone service, then make sure

you are connecting to an analog connection on the PBX. If

none exists, consider installing an analog telephone line for

the fax machine.

Place a test call to the telephone number to which you want

to send a fax to make sure that it is working correctly.

If the telephone line is being used by another device, then

wait until the other device is finished before sending a fax.

If you are using the On Hook Dial feature, then turn up the

volume to verify a dial tone.