Справочник Пользователя для Cisco SRW208
Chapter 5
Advanced Configuration
23
8-Port 10/100 Ethernet Switch with Webview
Current Status
Indicates if the LAG is currently
operating.
Reactivate Suspended LAG
Reactivates a LAG if the
LAG has been disabled as a result of a port lock or ACL
operation.
Admin Auto Negotiation
Enables or disables Auto
Negotiation on the LAG. Auto-negotiation is a protocol
between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control (the
flow control default is disabled) abilities to its partner.
Current Auto Negotiation
The current Auto Negotiation
setting.
Admin Speed
The configured speed at which the LAG is
operating.
Current LAG Speed
The current speed at which the LAG
is operating.
Admin Flow Control
Enables or disables flow control or
enables the auto negotiation of flow control on the LAG.
Current Flow Control
The user-designated Flow Control
setting.
PVE
Displays the PVE group to which the LAG is
configured.
Select Ports
Ports
Displays the ports that are members of the selected
LAG.
Port Management > LACP
Aggregate ports can be linked into link-aggregation port
groups. Each group is comprised of ports with the same
speed, set to full-duplex operation.
Aggregated Links can be manually setup or automatically
Aggregated Links can be manually setup or automatically
established by enabling Link Aggregation Control
Protocol (LACP) on the relevant links. Aggregate ports can
be linked into link-aggregation port-groups. Each group is
comprised of ports with the same speed. The LACP screen
contains fields for configuring LACP LAGs.
Port Management > LACP
LACP System Priority (1-65535)
Indicates the global
LACP priority value. The possible range is 1- 65535. The
default value is 1.
Port
Defines the port number to which timeout and
priority values are assigned.
LACP Port Priority
Defines the LACP priority value for
the port. The field range is 1-65535.
LACP Timeout
Administrative LACP timeout. A short or
Long timeout value can be selected. Long is the default.
Admin Key
A channel will only be formed between ports
having the same admin key. This only applies to ports
located on the same switch.
Port Management > PoE Power Settings
Port Management > PoE Power Settings
Port
Displays the selected port’s number.