Руководство Пользователя для Kurzweil k2500

              FXAlg #131: 4-Tap Delay ¥ FXAlg #132: 4-Tap Delay BPM

                                                                                                                                                                                                            

Tempo

Basis for the delay lengths, as referenced to a musical tempo in bpm (beats per minute). 
When this parameter is set to ÒSystemÓ, the tempo is locked to the internal sequencer 
tempo or to incoming MIDI clocks. When it is set to ÒSystemÓ, sources (FUNs, LFOs, 
ASRs etc.) will have no effect on the Tempo parameter.

LoopLength

The delay length of the Loop tap. If the feedback is turned up, this parameter sets the 
repeating delay loop length. The loop length is speciÞed as a fraction or multiple of the 
tempo, in ÒbeatsÓ. The length of a delay loop in seconds can be calculated as T = 
(beats/tempo) * 60.

Tapn  Delay

The delay lengths of the taps (n  = 1...4).  as tempo beat durations. The delay length is 
speciÞed as a fraction or multiple of the tempo, in ÒbeatsÓ. The length of a delay in 
seconds can be calculated as T = (beats/tempo) * 60. Use the output taps to create 
interesting rhythmic patterns within the repeating loop.

Wet/Dry

0 to 100%wet

Out Gain

Off, -79.0 to 24.0 dB

Fdbk Level

0 to 100%

Tempo

System, 1 to 255 BPM

Dry Bal

-100 to 100%

HF Damping

16 Hz to 25088 Hz

Hold

On or Off

LoopLength

0 to 32 bts

Tap1 Delay

0 to 32 bts

Tap2 Delay

0 to 32 bts

Tap3 Delay

0 to 32 bts

Tap4 Delay

0 to 32 bts

Tap1 Level

0 to 100%

Tap1 Bal

-100 to 100%

Tap2 Level

0 to 100%

Tap2 Bal

-100 to 100%

Tap3 Level

0 to 100%

Tap3 Bal

-100 to 100%

Tap4 Level

0 to 100%

Tap4 Bal

-100 to 100%