Руководство Пользователя для Advantek Networks awr-11n-rt
33
Enable:
Enable/Disable the static route.
Target:
Defines the base IP address (Network Number) that will be compared with the
destination IP address (after an AND with NetMask) to see if this is the target route.
NetMask:
Assign subnet mask that will be AND’d with the destination IP address and then
compared with the Target to see if this is the target route.
Gateway:
Enter IP address of the next hop router that will be used to route traffic for this
route. If this route is local (defines the locally connected hosts and Type = Host) then this IP
address MUST be the IP Address of the router.
Action:
Insert a new Static Route entry or update a specified entry.
3.2.5 NAT
NAT is used in gateway devices that form the boundary between the public Internet
and the private LAN. As IP packets from the private LAN traverse the gateway, Net translates
a private IP address and port number to a public IP address and port number, tracking those
translations to keep individual sessions intact.