Дополнительное Руководство для Fujitsu T4220

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to 
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to 
another menu, use the cursor keys.

Supervisor
Password is:

–—

Clear

A display-only field. Set is displayed when the system supervisor password is set 
and Clear when it is not.

User Password is:

–—

Clear

A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.

Set Supervisor 
Password

–—

[Enter]

Sets, changes or cancels the Supervisor Password. The Supervisor Password may 
be up to seven characters long and must include only letters or numbers (no 
symbols). Passwords are NOT case-sensitive. To cancel a password press the 
Enter key instead of entering characters in the Enter New Password field and in 
the Re-enter New Password field. When a Supervisor Password is set it must be 
used to access the BIOS setup utility.

Set User Password

–—

[Enter]

This field can only be accessed if the Supervisor Password is set. Sets, changes or 
cancels the User Password. A User Password may be up to seven characters long 
and must include only letters or numbers (no symbols). Passwords are NOT 
case-sensitive. To cancel a password press [Enter] key instead of entering char-
acters in the Enter New Password field and in the Re-enter New Password field. 
When a User Password is set it must be used to access the BIOS setup utility.

Minimum User 
Password Length:

–—

[0]

Supervisor can set password length (0 to 8) for user password. User cannot set a 
password shorter than the minimum length.

Password on Boot:

■

Disabled

■

First Boot

■

Every Boot

[Disabled]

When set to First Boot, a password (User or Supervisor) is required just once 
after the Power On Self Test (POST) before the operating system will be read 
from a disk. When set to Every Boot, a password (User or Supervisor) is required 
every time after the Power On Self Test (POST) before the operating system will 
be read from a disk. When set to Disabled no password is required.

On Automatic 
Wake up:

■

Disabled

■

Enabled

[Disabled]

When disabled, password entry is not required when the system wakes up auto-
matically. When enabled, password entry is required upon wake up.

Boot from 
Removable Media:

■

All

■

Supervisor only

[All]

Supervisor only allows access to boot the computer to removable media after 
the Supervisor Password is entered.

Flash Write:

■

Disabled

■

Enabled

[Enabled]

When disabled, the BIOS Flash memory will be write protected.

Hard Disk Security:

–—

–—

Configures hard disk security features

Owner 
Information:

–—

–—

Sets Owner information.

TPM (Security 
Chip) Setting

___

___

Opens the Trusted Platform Module (TPM) Security Chip Setting submenu to 
configure the Security Chip. 

Security Panel on 
Resume:

■

Disabled

■

Enabled

[Enabled]

Enables or disables the Security Panel feature upon Resume from Suspend.