Инструкции По Установке для Fantom Drives mxnas2500

3. Connect to the Share

You will be able to see “MaxNAS” under the workgroup “Workgroup” in your Network Neighborhood
(Windows) or “Network” (MacOS X)

Maxnas

4. Accessing System Administration

The MaxNAS comes pre-configured with the LAN1 Ethernet port set to DHCP (Dynamic Host
Configuration Protocol) and the LAN2 Ethernet port set to a static IP address 192.168.2.100.
The current IP addresses are displayed on the LCD panel, and the default WINS (Windows
Internet Naming Service) for the MaxNAS is “MaxNAS”. Included with your MaxNAS is a
discovery wizard for Mac and PC, which allows click-and-select simplicity; simply install
the wizard software, launch it, and the wizard discovers your
MaxNAS for administration.

When the wizard is launched,

it will briefly display a welcome window followed by the
main application Interface (Illustrated right) at the Device
Discovery Stage. All discovered MicroNet MaxNAS devices
will appear in the main discovery window. To administer
a MaxNAS, select the unit desired in the device discovery
window click

Start Browser

to launch the web administration

interface. If the MaxNAS is outside your subnet mask
and unreachable, click

to change the IP address

assignment.

5. Logging In

The default User ID and password on the MaxNAS are

UserID:

admin

Password: admin

Enter userID and password, and click

. You are

now ready to administer and customize your MaxNAS.