Руководство Пользователя для Sony PMW-320K
Attaching the Viewfinder
39
Cha
pte
r 2
P
rep
ar
at
ions
the viewfinder while you are carrying the
camcorder.
camcorder.
1
Loosen the front-to-back viewfinder
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
positioning levers and the front-to-back
viewfinder positioning knobs, and then
pull the viewfinder slide assembly
forward.
2
Using a 2.5 mm diameter hexagonal
wrench, detach the viewfinder slide
assembly.
wrench, detach the viewfinder slide
assembly.
3
Attach the BKW-401 with the supplied
bolts.
bolts.
4
Adjust the front-to-back position so
that the arm of the BKW-401 does not
touch the handle when it is raised.
that the arm of the BKW-401 does not
touch the handle when it is raised.
You can attach an optional DXF-51or DXF-C50W (5-inch) Electronic Viewfinder. To attach it, an
Accessory Shoe Kit (service part number: A-8274-968-B) is required.
Accessory Shoe Kit (service part number: A-8274-968-B) is required.
For details, consult a Sony service representative.
Note
It is not possible to use the supplied viewfinder and a 5-inch viewfinder at the same time.
Remove the cover of the grip, and attach the shoe and stopper screw of the Accessory Shoe Kit.
Bolts with
hexagonal
hole
Viewfinder slide assembly
Bolts supplied with the BKW-401
Adjust position so that arm
does not touch handle
Attaching a 5-inch Electronic Viewfinder