Инструкции Пользователя для RCA dcd302ra

The DSS

®

 remote can be programmed to control most brands of

remote controllable TVs, VCRs, and cable boxes. Most RCA, GE and
ProScan TVs and VCRs are already programmed. Other
manufacturer’s brands need to be programmed.

To determine whether your remote needs to be programmed,
turn the TV on, point the remote at the TV, and press the TV
button. Then press CHAN UP or DOWN to see whether the TV
responds to the remote commands.

Follow these steps to program your remote to control your TV.

1.

Turn on the TV.

2.

Look up your brand and code number(s) on the TV Code list
on the following page.

3.

Press and hold the TV button.

4.

Enter the three-digit code from the code list.

5.

Release the TV button and press OFF•ON or CHAN UP/DOWN
to see if the TV responds to the remote commands. If it
doesn’t, try the next code listed for your brand.

6.

Repeat these steps until the TV responds to the remote
commands.

Once the remote has been programmed with the correct codes,
you are ready to use it to control your devices.

To operate the device:

1.

Press the device button (TV, DSS

®

, VCR, or ALT) to set the

remote to control the device.

2.

Press OFF•ON to turn the device off or on.

3.

Use the remote buttons that apply to that device.