Справочник Пользователя для RCA RCU500
6
Turning the TV On and Off.
1.
Press
TV
to set the remote to control the
TV (Most RCA, GE and ProScan models
will only turn on when TV is pressed,
not POWER.)
will only turn on when TV is pressed,
not POWER.)
2.
Press
POWER
to turn the TV on or off.
Change Channels on the TV
Press
CHANNEL UP
or
CHANNEL DOWN
to change channels on the TV or enter the
channels as you would normally for
your TV.
channels as you would normally for
your TV.
Use the buttons below to adjust features on
your TV.
your TV.
DISPLAY–
Shows displays on the screen and
clears menus from the screen.
MUTE –
Switches the TV sound on or off.
PREV CH (PREVIOUS CHANNEL) –
Changes
back and forth between two channels. Select a
channel using the number buttons and then
select another. Press
channel using the number buttons and then
select another. Press
PREV CH
to switch
between the two channels.
If your TV has picture-in-picture, you may be
able to use the following buttons to adjust PIP.
able to use the following buttons to adjust PIP.
PIP (PICTURE-IN-PICTURE) –
Turns the small
picture on or off.
MOVE PIP –
Moves the small picture to the
next corner.
SWAP –
Switches the channel in the small
picture with the big picture.
FREEZE –
Freezes or unfreezes the small picture.
You may want to experiment with the remote
to determine all the buttons which will work
with your TV.
to determine all the buttons which will work
with your TV.
Operating A TV