Справочник Пользователя для RCA D52W25

Connections & Setup

Connections & Setup

This section describes the jacks you can use to make connections. There are several ways to 
connect components to your TV. 

ANTENNA/CABLE  Lets you connect a coaxial cable to receive the signal from the 
antenna, cable, cable box, or if using the examples on pages 6-11, a VCR. 

COMPONENT INPUT  Lets you connect a component video source, such as a DVD 
player.

•    CMP1 Y PB PR (Component Video)  Provides optimum picture quality because 

the video is separated into three signals. Use three video-grade cables for the 
connection. When using CMP1 Y PB PR, make sure to connect left and right audio 
cables to the CMP1 L and R Audio Input jacks.

•    CMP1 L (Audio)  Provides left audio connection. The left audio connector is 

usually white.

•    CMP1 R (Audio)  Provides right audio connection. The right audio connector is 

usually red.

COMPOSITE INPUTS  Lets you connect another component such as a VCR, DVD 
player, or laserdisc player. Its AUDIO jacks are the same as described for CMP1 above.

•    VID1 S-VIDEO  Provides better picture quality than the video jacks (VID1 and 2 

Video) because the color part of the picture is separated from the black and white 
part of the picture. When using VID1 S-VIDEO, make sure to connect left and right 
audio cables to the VID1 L/MONO and R Audio Input jacks.

•    VID1 V (Video)  Provides composite video connection. The video connector is 

usually yellow.

•    VID2 S-VIDEO, V and L/MONO and R Audio  Allows you to connect a component 

such as a VCR, DVD player, or laserdisc player.  Their description is the same as 
VID1 above.