Руководство Пользователя для RCA rtb1023

- 24 -

There is no picture.
•   Check that the TV is operating correctly.
•   Check the connections.
•   Select the AV input assigned to the unit on the 

TV.

•   Replace the HDMI cable with a better one. A bad 

HDMI cable can cause loss of video.

The picture is of poor quality (with snow or 
lines).
•   Check the connections.

There is no sound or the sound is of poor quality.
•   Check the connections.
•   Make sure the speakers are connected.
•   Make sure the MUTE function is not on.

No surround sound.
•  Check to see if system is actually in full Surround 

mode (see Audio setting & Speaker setting 
on page 21, 22). For AUX mode, press the 
SURROUND button on the remote control - the 
front panel display should indicate the current 
setting (STEREO or CH 5.1). If current setting 
is  STEREO, the surround speakers and center 
speaker will be inactive. Press 

/

 button to 

change surround mode from STEREO.  

  Note: Not all discs, media fi les, or audio sources 

provide surround audio, thus lack of audio to 
surround speakers may be due to the actual 
source being played.

I can’t fi nd my fi le in the JPEG listing.
•   Make sure the fi le name is valid. 

The remote control does not work or works only 
intermittently.
•  Check that batteries are inserted or change 

them.

•   Aim the remote control at the unit. The infrared 

beam must not be blocked or interrupted.

•  Check that the remote control is confi gured  to 

control the device you are trying to operate with 
it.

The subtitles do not appear.
•   Check that the BD/DVD disc provides subtitles.
•   Refer to the section on how to display subtitles.

The disc menu language is not the correct one.
•   The disc menu language has not been set up.
•   The language of your choice is not available on 

the disc.

The unit does not switch on.
•   Make sure it is plugged in.
•   Press ON/OFF button on the remote control or ON 

/STANDBY button on the front of the unit. 

The device switches off  spontaneously.
•  If the SLEEP SETUP (see page 12 and 13 for 

details) is set to 30, 60, 90,120 minutes, the device 
will turn off  automatically once it counts down 
the sleep time. If Auto Power Down in System 
settings is set to 30, 45, 60 minutes,  the device 
will switch off  automatically if it remains idle and 
no activities are made. Switch it on again.

Blu-ray Disc or DVD does not play
•  Make sure that the disc has the correct region code.
•  Some Blu-ray discs will only play over an HDMI 

connection.

•   It might be impossible to read the disc.
•   Insert the disc with the printed side facing up.
•   Check that the disc can actually be played by this 

device.

•  Clean the disc.

Picture-in-Picture(PiP) does not work on a Blu-
ray Disc
•  Make sure that the disc supports PiP mode.

When playing a BD-Live disc, the screen is black
•  Erase BD Storage.
•  Make sure that the internet connection is working.
•  Make sure that the internet cable is connected 

securely and correctly to the unit and the internet 
jack. Some discs require an Internet connection 
to play.

Cannot connect to the internet
•  Make sure that the Internet connection is set up 

correctly. 

•  Test the Internet connection to make sure that it 

is working. 

•  Make sure that the BD-Live Internet Access 

option is not set to Prohibit Access. 

After connecting to the Internet, I cannot 
download a fi le
•  Erase BD Storage.
•  Make sure that the internet connection is working.
•  Try a diff erent USB fl ash drive.

File was downloaded, but playback from fi le 
pauses
•  Make sure that the USB fl ash drive is a USB 

2.0 device. Using a USB1.1 device may cause 
pausing.

•  Try a diff erent USB fl ash drive.