Руководство Пользователя для RCA vr645hf
45
OTHER FEATURES
GO-TO SEARCH
Current tape counter is
2:17:25
Press REV or FWD
to go to -:--:00
to go to -:--:00
Press SEARCH to exit.
Go-To Search
The Go-T o search feature enables the VCR to quickl y locate a counter
reading anywhere on the tape. When the VCR locates the counter
reading, it will begin playback.
reading anywhere on the tape. When the VCR locates the counter
reading, it will begin playback.
1. Press ST OP.
2. Press SEARCH on the remote until the GO-TO SEARCH menu
appears on the screen.
3. Press number buttons to enter the hour(s) and/or minutes of
the counter reading you want the VCR to “go to”. Press
CLEAR on the r emote to cor rect an entry.
CLEAR on the r emote to cor rect an entry.
4. Pr ess FOR WARD to sear ch forward or REVERSE to sear ch in
reverse.
5. Pr ess ST OP to stop Go-T o searching.
Blank Search
The VCR searches for blank portions of the tape that are more
than six seconds in length.
than six seconds in length.
1. Inser t a recorded tape and press ST OP.
2. Press SEARCH on the remote until the B LANK SEARCH
menu appears.
3. Pr ess FOR WARD to begin sear ching. A messa ge appears on
the screen if a blank area is not found.
4. Press STOP to stop blank searching.
BLANK SEARCH
Press FWD to begin
searching for blank
section of tape.
searching for blank
section of tape.
Press SEARCH to exit
BLANK SEARCH
Searching for
blank tape...
blank tape...
Press STOP to cancel
If you insert a pre-recorded tape
with the safety tab removed, Index,
Go-To, and Blank Search are not
available.
with the safety tab removed, Index,
Go-To, and Blank Search are not
available.
TRACKING
Your VCR has automatic tracking which r emoves the str eaks or
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRA CKING buttons to r emove the
streaks or snow. You can also use tracking when you pause a tape
to reduce jittering of the picture.
snow from the picture. Automatic tracking is activated when you
insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a
different VCR. Just use the TRA CKING buttons to r emove the
streaks or snow. You can also use tracking when you pause a tape
to reduce jittering of the picture.
When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
turned off. To turn automatic tracking back on, press both
TRACKING buttons on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only playback.