Руководство Пользователя для RCA vr676hf
Recording a Program
30
Recording While You’re Away
1.
Press MENU•PROG to display the VCR MAIN
MENU on the TV screen
MENU on the TV screen
.
2.
Press 4 to select CHANNELS menu.
3.
Press 4 to select CABLE/DSS BOX SETUP
menu.
menu.
4.
Cable box not used for all channels: Press 2.
You are finished with cable box setup.
You are finished with cable box setup.
Cable box or RCA DSS® receiver used for all
channels: Press 1 to continue .
channels: Press 1 to continue .
5.
Press two numbers on the remote to enter the
output channel of your cable box or satellite
receiver. Press 0 before a single-digit number.
Valid numbers are 01 – 99.
output channel of your cable box or satellite
receiver. Press 0 before a single-digit number.
Valid numbers are 01 – 99.
If you connected your cable box or satellite
receiver to the VCR using it’s AUDIO/VIDEO
OUT jacks, press INPUT on the remote to select
the VIDEO1 or VIDEO2 option.
receiver to the VCR using it’s AUDIO/VIDEO
OUT jacks, press INPUT on the remote to select
the VIDEO1 or VIDEO2 option.
Press CLEAR on the remote to correct an entry.
6.
Press MENU•PROG to proceed.
The VCR now automatically enters the output
channel of your cable box or satellite receiver
as the channel to be recorded in the VCR
PLUS+ and TIMER RECORDINGS menus.
channel of your cable box or satellite receiver
as the channel to be recorded in the VCR
PLUS+ and TIMER RECORDINGS menus.
7.
Press MENU•PROG to proceed.
8.
Enter the code for your cable box or receiver.
RCA DSS Receiver: Enter 00 for the code.
The receiver should turn on and tune to
channel 200.
The receiver should turn on and tune to
channel 200.
Setting Up the Cable Box or RCA DSS® Satellite Receiver
Cable/DSS Box Setup allows the VCR to record programs from a cable box or satellite
receiver. If your cable box or RCA DSS® satellite receiver can be controlled by remote, the
VCR may be able to tune it to the channel you want to record during VCR Plus+ and timer
recordings. You may need to position the remote-controllable cable box or satellite receiver
on top of the VCR at an angle to receive the infrared remote signal. See pages 4-7.
receiver. If your cable box or RCA DSS® satellite receiver can be controlled by remote, the
VCR may be able to tune it to the channel you want to record during VCR Plus+ and timer
recordings. You may need to position the remote-controllable cable box or satellite receiver
on top of the VCR at an angle to receive the infrared remote signal. See pages 4-7.
The VCR will tune your receiver to the correct
channel during timer recordings. – – – DSS
will appear for the channel in the timer
program menu.
channel during timer recordings. – – – DSS
will appear for the channel in the timer
program menu.
continued on next page
Did the DSS receiver
turn on and tune to
channel 200?
turn on and tune to
channel 200?
1 YES, setup complete
2 NO, try another code
2 NO, try another code
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
2 Timer Recordings
3 Set Clock
4 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable/DSS Setup
5 VCR Plus+ Channel List
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable/DSS Setup
5 VCR Plus+ Channel List
CABLE/DSS BOX SETUP
Is a cable box or DSS
receiver being used
with the VCR for all
channels?
receiver being used
with the VCR for all
channels?
1 Yes
2 No
2 No
CABLE/DSS BOX SETUP
Enter the output
channel of the cable
box or DSS receiver.
channel of the cable
box or DSS receiver.
--
CABLE/DSS BOX SETUP
The VCR will now receive
all channels from the
cable box or DSS
receiver on VCR Ch 03
all channels from the
cable box or DSS
receiver on VCR Ch 03
Press MENU to proceed
CABLE/DSS BOX SETUP
Enter the code for
your cable box or DSS
receiver from the list
in your User's Manual.
your cable box or DSS
receiver from the list
in your User's Manual.
--
Press MENU to Proceed