Краткое Руководство По Установке для Printronix l7032
31
Initialize the Developer Unit
CAUTION
You must initialize the developer unit, or the printer will not
apply toner properly. If this happens, you must remove the
developer mix from the developer unit and replace it with new
mix.
apply toner properly. If this happens, you must remove the
developer mix from the developer unit and replace it with new
mix.
1.
Plug in the printer's power cord.
2.
Use the on/off switch to turn the printer on.
3.
Press the MENU button to enter the menu system. The LCD
will display
MAIN MENU
CONFIGURATIONS
will display
MAIN MENU
CONFIGURATIONS
4.
Press
;
(left arrow) or
<
(right arrow) until you see
MAIN MENU
CONSUMABLES on the display.
CONSUMABLES on the display.
5.
Press
>
(down arrow) to select the CONSUMABLES menu.
6.
Press
;
(left arrow) or
<
(right arrow) until you see
CONSUMABLES
INIT DEVELOPER on the display.
INIT DEVELOPER on the display.
7.
Press SHIFT +
>
to select.
8.
Use
;
or
<
to select No or Yes to continue, then use SHIFT +
>
to begin the initialization.
Initializing the developer unit takes about 190 seconds (a little
more than 3 minutes).
more than 3 minutes).
9.
When you see the "DEVELOPER INITIALIZED" message,
press SHIFT +
press SHIFT +
=
to exit the menu system.
"Off line" appears on the status display.
10. Use the on/off switch to turn the printer off.