Справочник для Printronix P7000
28
Chapter
2
The Configuration Menu
The option “DBCS ASCII Style” specifies the appearance of the single-byte
numeric characters. If it is set to Oversize, the numeric characters will appear
larger than other single-byte characters. For example, the appearance of
character “8” will be changed to “
numeric characters. If it is set to Oversize, the numeric characters will appear
larger than other single-byte characters. For example, the appearance of
character “8” will be changed to “
8
.” If it is set to OCRB, the numeric
characters will print in OCRB style.
The option “Compressed Mode” specifies the appearance of ASCII characters
and DBCS characters in ASCII mode. If it is set to “Enable,” it can print out
ASCII mode ASCII char and half width DBCS characters.
and DBCS characters in ASCII mode. If it is set to “Enable,” it can print out
ASCII mode ASCII char and half width DBCS characters.
The option “DBCS Compressed” specifies the appearance of DBCS and
ASCII characters in DBCS mode. If set to “Enable,” both the DBCS and ASCII
characters will print at half of the width of their original size.
ASCII characters in DBCS mode. If set to “Enable,” both the DBCS and ASCII
characters will print at half of the width of their original size.
The option “Address Table” specifies the address table supported:
•
GB18030 for Hanzi GB printer
•
BIG5 (default), CNS, TCA, ETEN, IBM5550, TELETEXT, WANG, BIG5+,
BIG5E, and HKSCS-2001 for Hanzi Big5 printer.
BIG5E, and HKSCS-2001 for Hanzi Big5 printer.
•
Shift-JIS for Kanji printer
The option “UTF8” allows the user to input UTF8 data stream.
The option “Taller 15cpi” specifies the appearance of ASCII character in 15cpi
in Ascii mode. If it is set to “Enable”, the characters in 15cpi will be the same
height with other CPIs like 10cpi. If it is set to “Disable”, the characters in
15cpi will appear shorter than other CPIs like 10cpi.
in Ascii mode. If it is set to “Enable”, the characters in 15cpi will be the same
height with other CPIs like 10cpi. If it is set to “Disable”, the characters in
15cpi will appear shorter than other CPIs like 10cpi.
The option “Horizontal Expnd” specifies the character horizontal expansion in
dot for both ASCII and DBCS characters in DBCS mode.
dot for both ASCII and DBCS characters in DBCS mode.
The option “Vertical Expnd” specifies the character vertical expansion in dot
for both ASCII and DBCS characters in DBCS mode.
for both ASCII and DBCS characters in DBCS mode.
Graphics Spd Up
This menu is used to increase (speed up) graphic printing speed by turning on
the Enhanced/Turbo mode.
the Enhanced/Turbo mode.
•
Normal. The default. The printer prints at the given input graphics
resolution.
resolution.
•
Enhanced. The printer provides first-level speed up, which means the
speed is faster than Normal mode.
speed is faster than Normal mode.
•
Turbo. The printer provides second-level speed up, which means the
speed is faster than Enhanced mode.
speed is faster than Enhanced mode.
•
Match Typeface. The input 180 x 180 dpi graphics resolution will drop-
dot to the resolution matching the typeface selected.
dot to the resolution matching the typeface selected.
Page Format
Margins
You can set the bottom, left, and right form margins.