Руководство Пользователя для Toshiba M30
Troubleshooting
Satellite M30 Series
9-13
Satellite M30 Series
Version
1
Last Saved on 10.09.2003 13:14
ENGLISH using Mies10 Online.dot –– Printed on 10.09.2003 as
Problem Procedure
Some CD/DVDs run
correctly, but others
do not
correctly, but others
do not
The software or hardware configuration may be
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD’s documentation.
causing a problem. Make sure the hardware
configuration matches your software’s needs.
Check the CD/DVD’s documentation.
Check the type of CD/DVD you are using. The
drive supports:
drive supports:
DVD-ROM: DVD-ROM, DVD-Video
CD-ROM: CD-DA, CD-Text, Photo CD
(single/multi-session), CD-ROM
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Mode 1, Mode 2, CD-ROM XA
Mode 2 (Form1, Form2), Enhanced
CD (CD-EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the Optical media
drives section in Chapter 2, The Grand Tour.
match that on the CD-RW/DVD-ROM drive.
Region codes are listed in the Optical media
drives section in Chapter 2, The Grand Tour.
Cannot write correctly If you have trouble writing, make sure you are
observing the following precautions:
■
Use only media recommended by TOSHIBA.
■
Do not use the mouse or keyboard during
writing.
writing.
■
Use only the software supplied with the
computer for recording.
computer for recording.
■
Do not run or start other software during
writing.
writing.
■
Do not jar the computer during writing.
■
Do not connect/ disconnect external devices
or install/remove internal cards during
writing.
or install/remove internal cards during
writing.
If problems persist, contact your dealer.