Руководство Пользователя для Toshiba tdp-sp1u
24
Turning the power on and off
■
Connecting the power cord
1
Insert the power cord connector into
the AC IN socket of the projector.
2
Insert the power cord plug into a
wall or other power outlet.
■
Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If the cover is left on the projector, it could
become deformed due to heat.
turned on. If the cover is left on the projector, it could
become deformed due to heat.
■
Turning the power on
1
Press the ON/STANDBY
button.
The power is turned on, and the ON/
STANDBY indicator lights green. After
a moment, the start-up screen ap-
pears.
STANDBY indicator lights green. After
a moment, the start-up screen ap-
pears.
CAUTION
•
Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyesight.
•
Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheat-
ing.
•
Do not place your hands, face, or other objects near the air exhaust, the lamp cover or
the bottom of the unit. Doing so could result in injury and/or damage the object.
Power cord connector
(Supplied)
Start-up screen
Control panel
Remote
Control
Notes
• The start-up screen will disappear after a moment. You can also configure the system to
prevent the start-up screen from appearing. To do this, use the
Default setting menu
• The first time you use the projector after purchase, after the start-up screen disappears,
the start menu is displayed
• Do not touch the lens directly with your hand. If fingerprints or stains are left on the
projection lens surface, they may interfere with the projector’s ability to project images on
the screen.
the screen.