Руководство Пользователя для Toshiba tdp-sp1u

9

If your line voltage is 220 to 240V, use one of the following types of cable/plug.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

6A

Line voltage

EURO

UK

220    240V

220    240V

200    240V

200    240V

200    240V

Plug

configuration Plug type

Line voltage

Use a 5A fuse which is approved by ASTA 

or BSI to BSI362.

Always replace the fuse cover after 

changing the fuse.

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on 

the lens and the crucial internal parts. Do not use the unit for at least 2 hours when there 

is an extreme or sudden change in temperature to prevent the unit from possible damage.

•  Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

•  Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening

their lives, and darkening the screen.

•  Do not use this product in the upright position or tilt it up or down by more than 20° from

level. Doing so may cause a failure or shorten the life of the product.

•  Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

•  Moving the projector from a low-temperature room to a high-temperature room may cause

condensation on the lens or internal parts. If you continue to use it in that situation it may 

malfunction. Wait until the condensation naturally disappears.

•  In a high altitude location where air is thin, cooling efficiency is reduced so use the pro-

jector with 

[Fan mode] set to [High].