Руководство Пользователя для Toshiba 42XV545U
53
XV545U (E/F) Web 177.8:228.6
Chapter 6: Using the TV’s features
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass,
treble, and balance.
treble, and balance.
To adjust the audio quality:
1
From the Audio menu, highlight Audio Settings
and press T.
and press T.
2
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
(Bass, Treble, or Balance).
3
Press C or c to adjust the level.
•
C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
balance in the left channel (depending on the item
selected).
•
c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
balance in the right channel (depending on the item
selected).
4
To save the new settings, highlight Done and press
T.
To reset the settings to the factory defaults, highlight
Reset
To reset the settings to the factory defaults, highlight
Reset
and press T.
Using the StableSound
®
feature
The StableSound
®
feature limits the highest volume level
to prevent extreme changes in volume when the signal
source changes (for example, to prevent the sudden
increase in volume that often happens when a TV
program switches to a commercial).
source changes (for example, to prevent the sudden
increase in volume that often happens when a TV
program switches to a commercial).
To turn on the StableSound
®
feature:
1
From the Audio menu, highlight Audio Settings
and press T.
and press T.
2
In the StableSound field, select On.
3
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:
to the following factory settings:
Bass . . . . . . . . center (50)
Treble . . . . . . . center (50)
Balance . . . . . center (0)
StableSound . Off
Treble . . . . . . . center (50)
Balance . . . . . center (0)
StableSound . Off
To turn off the StableSound feature:
Select Off in step 2 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or
other digital audio system to the DIGITAL AUDIO OUT
terminal on the TV (- “Connecting a digital audio
system” on page 18).
format when you connect a Dolby Digital decoder or
other digital audio system to the DIGITAL AUDIO OUT
terminal on the TV (- “Connecting a digital audio
system” on page 18).
To select the optical audio output format:
1
Tune to a digital source on the ANT/CABLE input.
2
From the Audio menu, highlight Audio Setup and
press T.
press T.
3
In the Optical Output Format field, select either
Dolby Digital
Dolby Digital
or PCM, depending on your device.
4
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Using the Dolby
®
Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC
dynamic range to be further compressed, allowing you
to switch from digital to analog broadcasts at the same
dynamic range.
dynamic range to be further compressed, allowing you
to switch from digital to analog broadcasts at the same
dynamic range.
To use the Dolby Digital Dynamic Range Control:
1
From the Audio menu, highlight Audio Setup and
press T.
press T.
2
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the
audio is output with minimal compression.
select Compressed. When Standard is selected, the
audio is output with minimal compression.
3
To save the new settings, highlight Done and press
T.
To revert to the factory defaults, highlight Reset and
press T.
To revert to the factory defaults, highlight Reset and
press T.
Note:
• This item will be grayed out for NTSC signals, Video,
• This item will be grayed out for NTSC signals, Video,
ColorStream, HDMI, and PC inputs.
• Dolby Digital Dynamic Range Control will function in relation
to Optical Output Format (PCM mode).
52XV545U_EN.book Page 53 Monday, August 4, 2008 10:54 AM