Руководство Пользователя для Toshiba 42RV535U
22
RV535U (E/F) Web 213:276
Chapter 3: Using the remote control
Using the remote control to control
your other devices
your other devices
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to operate,
you must first program the remote control to recognize
the device (if you have not already done so)
(- pages 24–26).
that the remote control is not preprogrammed to operate,
you must first program the remote control to recognize
the device (if you have not already done so)
(- pages 24–26).
To use your TV remote control to operate a:
•
Cable converter box or satellite receiver, set the MODE
SELECT switch
SELECT switch
to CABLE/SAT.
•
VCR, set the MODE SELECT switch to AUX 1.
•
DVD player or HTIB, set the MODE SELECT switch
to AUX 2.
to AUX 2.
Note: Even after the TV remote control is programmed, it may
not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device’s original remote control.
not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device’s original remote control.
1
POWER
Turns the selected device on and off.
2
Channel Numbers (0-9)
Press to directly access
channels (as opposed to < ,).
3
+10
Press to directly access DVD chapters higher
than 10.
4
TOP MENU
Accesses a DVD’s top menu.
5
CH
Bb For channels programmed into the channel
memory (- page 39):
B selects the next higher channel.
b selects the next lower channel.
B selects the next higher channel.
b selects the next lower channel.
6
GUIDE
Displays the channel guide in the CABLE/
SAT mode.
SET UP
SET UP
Accesses a DVD’s setup menu in the AUX
mode.
7
INFO
Displays TV status information on-screen.
8
BbC c Press to navigate DVD menus (may not work
on some DVD players).
on some DVD players).
9
ENTER
Required by some satellite receivers and
DVD players to activate certain functions.
10 DVD CLEAR
Press to reset the title and chapter
number.
11 PLAY
Begins playback of a tape or DVD.
12 PAUSE
Press during play or record mode to pause
the picture; press again to restart.
13 STOP
Stops the tape or DVD.
14 SKIP
z Skips forward to locate later DVD chapters.
15 FF
Fast-forwards the tape or DVD. (Press during
play mode to view the picture moving rapidly
forward.)
forward.)
16 SKIP
Z Skips back to beginning of current DVD
chapter, or locates previous chapters.
17 REW
Rewinds/reverses the tape or DVD. (Press
during play mode to view the picture moving
rapidly backward.)
rapidly backward.)
18 TV/VCR
To view one program while recording
another, press to select TV mode.
SEARCH
selects a specific DVD chapter, title or
time.
19 REC
Starts tape recording.
20 MODE SELECT switch
Set to “TV” to control the
TV; “CABLE/SAT” to control a cable converter box
or satellite receiver; “AUX 1” to control a VCR;
“AUX 2” to control a DVD player or HTIB.
or satellite receiver; “AUX 1” to control a VCR;
“AUX 2” to control a DVD player or HTIB.
16
17
19
18
Point the remote control
directly at the device.
52RV535U_EN.book Page 22 Tuesday, July 22, 2008 5:25 PM