Руководство Пользователя для Netopia 2e-h
Cayman 2E-H User’s Guide
Configuring Your Cayman 2E-H
November 2000
3-25
Figure 3-11
Pinhole Configuration Window
To configure pinhole settings:
1.
Enter the number identifying the port used by the
Cayman 2E-H to listen for Web-based configuration
connection requests in the
Cayman 2E-H to listen for Web-based configuration
connection requests in the
Web-HTTP Port field.
If you set up a NAT pinhole for HTTP traffic (port 80), enter a
number other than 80 in this field.
number other than 80 in this field.
After you have made this change, you will need to use this
port number to open a Web connection to the Cayman 2E-H.
For example, if you change the Web-HTTP port to 1080 on a
Cayman 2E-H using its default IP address (
port number to open a Web connection to the Cayman 2E-H.
For example, if you change the Web-HTTP port to 1080 on a
Cayman 2E-H using its default IP address (
192.168.1.254
),
you would open a web connection to the device by entering
the URL
the URL
http://192.168.1.254:1080
.
2.
Enter the number identifying the port used by the router
to listen for Telnet-based configuration connection
requests in the
to listen for Telnet-based configuration connection
requests in the
Telnet Port field.
If you set up a NAT pinhole for Telnet traffic (port 23), enter a
number other than 23 in this field.
number other than 23 in this field.