Руководство Пользователя для Netopia 2e-h
Cayman 2E-H User’s Guide
Using the Command Line Interface
November 2000
4-1
4
Using the Command
Line Interface
Line Interface
Overview
About Root Commands
About CONFIG Commands
CONFIG Commands
Overview
The Cayman 2E-H operating software includes a command line
interface (CLI) that lets you monitor and configure your Cayman
2E-H over a Telnet or console connection. You can use the command
line interface to enter and update a Cayman 2E-H’s configuration
settings, monitor its performance, and restart it.
interface (CLI) that lets you monitor and configure your Cayman
2E-H over a Telnet or console connection. You can use the command
line interface to enter and update a Cayman 2E-H’s configuration
settings, monitor its performance, and restart it.
Starting and
Ending a CLI
Session
Ending a CLI
Session
You can open a command line interface session by opening a Telnet
connection from a workstation on your network or by connecting a
terminal to the console port on the Cayman 2E-H.
connection from a workstation on your network or by connecting a
terminal to the console port on the Cayman 2E-H.
Connecting from Telnet
You initiate a Telnet connection by issuing the following command
from an IP host that supports Telnet (or a personal computer running
a Telnet application such as NCSA Telnet).
from an IP host that supports Telnet (or a personal computer running
a Telnet application such as NCSA Telnet).