Руководство Пользователя для Netopia 2e-h

Using the Command Line Interface

Cayman 2E-H User’s Guide

November 2000

set ip wan address ip_address

Assigns an IP address to the Cayman 2E-H on the wide area network. 
The IP address you assign to an Ethernet port must be unique on 
your network.

set ip wan broadcast broadcast_address

Specifies the broadcast address for the TCP/IP network connected to 
the WAN Ethernet port. IP hosts use the broadcast address to send 
messages to every host on your network simultaneously. 

The broadcast address for most networks is the network number 
followed by 255. For example, the broadcast address for the 
192.168.1.0 network would be 192.168.1.255.

set ip wan netmask netmask

Specifies the subnet mask for the TCP/IP network connected to the 
WAN Ethernet port. The subnet mask specifies which bits of the 
32-bit binary IP address represent network information. The default 
subnet mask for most networks is 255.255.255.0 (Class C subnet 
mask).

set ip wan restrictions { none | admin-disabled | 

admin-only }

Specifies whether an administrator can open a Telnet connection to 
the Cayman 2E-H over the WAN Ethernet interface to monitor and 
configure the Cayman 2E-H. You can enable or disable administrator 
access or specify that the WAN port can only be used for 
administrative traffic. By default, administrative restrictions are 
turned off, meaning an administrator can open a Telnet connection 
through the WAN port.