Руководство Пользователя для Netopia 2e-h-w
Diagnostic Console
Cayman 2E-H-W User’s Guide
B-4
November 2000
Basic Commands
The
defaults
and
help
commands are especially useful for users not
familiar with the diagnostic console.
defaults
The
defaults
command sets the EPROM settings in the Cayman
2E-H-W to their factory default values. After you reset the Cayman
2E-H-W EPROM values to their defaults, you must save them to
non-volatile storage with the
2E-H-W EPROM values to their defaults, you must save them to
non-volatile storage with the
save
command.
The default boot settings for the Cayman 2E-H-W are presented in the
following table.
following table.
The default settings cause the Cayman 2E-H-W to boot from flash if
possible. If the flash image is corrupt or unusable, the Cayman
2E-H-W tries the BOOTP protocol 10 times to find IP configuration
and a TFTP download server. If the Cayman 2E-H-W server succeeds
in downloading an image from a TFTP server, it copies the
downloaded image to flash memory.
possible. If the flash image is corrupt or unusable, the Cayman
2E-H-W tries the BOOTP protocol 10 times to find IP configuration
and a TFTP download server. If the Cayman 2E-H-W server succeeds
in downloading an image from a TFTP server, it copies the
downloaded image to flash memory.
Setting
Explanation
flash on
Use the image in flash memory if possible.
ip 0
The IP address of the Cayman 2E-H-W has not
been specified. TFTP download will not be
attempted.
been specified. TFTP download will not be
attempted.
bootp on
The Cayman 2E-H-W will use BOOTP as part
of its autoboot sequence.
of its autoboot sequence.
autoboot 10
Use autoboot on startup and try 10 times
before giving up.
before giving up.
autoprog never
Do not reprogram the Cayman 2E-H-W flash
memory automatically.
memory automatically.