Руководство Пользователя для Netopia 2e-h-w

Using the Command Line Interface

Cayman 2E-H-W User’s Guide

November 2000

who

Displays the names of the current shell users.

wireless learn

Lets you put your Cayman 2E-H-W into Learn mode for 60 seconds, 
allowing it to acquire its network address from a HomeRF device in 
Teach mode on your network. Only supported for HomeRF.

wireless teach

Lets you put your Cayman 2E-H-W into Teach mode for 60 seconds, 
allowing it to advertise its network address to other HomeRF devices 
in Learn mode on your network. Only supported for HomeRF.

You reach the configuration mode of the command line interface by 
typing 

configure

 (or any truncation of 

configure

, such as 

c

 or 

config

) at the CLI ROOT prompt.

When you are in CONFIG mode, the CLI prompt consists of the 
name of the Cayman 2E-H-W followed by your current node in the 
hierarchy and two right angle brackets (>>). For example, when you 
enter CONFIG mode (by typing 

config

 at the ROOT prompt), the 

Dogzilla (top)>>

 prompt reminds you that you are at the top of the 

CONFIG hierarchy. If you move to the 

ip

 node in the CONFIG 

hierarchy (by typing 

ip

 at the CONFIG prompt), the prompt changes 

to 

Dogzilla (ip)>>

 to identify your current location.

Some CLI commands are not available until certain conditions are 
met. For example, you must enable IP for an interface before you can 
enter IP settings for that interface.