Руководство Пользователя для Netopia 2e-w
Cayman 2E-W User’s Guide
Monitoring Your Cayman 2E-W
November 2000
5-13
Using the
Diagnose Utility
Diagnose Utility
The Diagnose utility runs a series of internal checks and loopback
tests to verify network connectivity over each interface on your
Cayman 2E-W. To run the Diagnose utility, click the
tests to verify network connectivity over each interface on your
Cayman 2E-W. To run the Diagnose utility, click the
Diagnose button
on the Monitor window.
Figure 5-13
Diagnose Window
The Diagnose window displays the results of each test as the utility
runs. If one test is dependent on another, the Diagnose utility
indents its entry in the Diagnose window. For example, the Diagnose
utility indents the Check IP connect to Ethernet (LAN) entry, since
that test will not run if the Check Ethernet LAN Connect test fails.
runs. If one test is dependent on another, the Diagnose utility
indents its entry in the Diagnose window. For example, the Diagnose
utility indents the Check IP connect to Ethernet (LAN) entry, since
that test will not run if the Check Ethernet LAN Connect test fails.
Each test generates one of the following result codes:
PASS
The test was successful.
FAIL
The test was unsuccessful.
SKIPPED
The test was skipped because a test on which it
depended failed.
depended failed.
PENDING
The test timed out without producing a result. Try
running the test again.
running the test again.