Руководство Пользователя для Netopia 2e-w

Using the Command Line Interface

Cayman 2E-W User’s Guide

4-22

November 2000

Ethernet MAC address before you can specify a new Ethernet MAC
address.

set ethernet-MAC-override address mac_address

Specifies the Ethernet MAC address (in hexadecimal

nn.nn.nn.nn.nn.nn

format) for your Cayman 2E-W.

To restore the default MAC address for the Cayman 2E-W WAN port,
enter the

set ethernet-MAC-override option off

command and

restart your Cayman 2E-W.

IP Settings

You can use the command line interface to specify whether TCP/IP
is enabled, identify a default gateway, and to enter TCP/IP settings for
the Cayman 2E-W LAN and WAN ports. If PPPoE is turned off, you
must specify settings for Ethernet A and B separately. if PPPoE is
turned on, you can omit the A|B labels.

Basic Settings

set ip option { on | off }

Enables or disables TCP/IP services in the Cayman 2E-W. You must
enable TCP/IP services before you can enter other TCP/IP settings for
the Cayman 2E-W. If you turn off TCP/IP services and save the new
configuration, the Cayman 2E-W clears its TCP/IP settings.

Ethernet Settings

set ip ethernet [ A | B ] option { on | off }

Enables or disables communications through the designated
Ethernet port in the Cayman 2E-W. You must enable TCP/IP
functions for an Ethernet port before you can configure its network
settings.

set ip ethernet [ A | B ] address ip_address

Assigns an IP address to the Cayman 2E-W on the specified network.
The IP address you assign to an Ethernet port must be unique on