Руководство Пользователя для Netopia 2e-w

Using the Command Line Interface

Cayman 2E-W User’s Guide

November 2000

set snmp community name

Adds the specified name to the list of communities associated with 
the Cayman 2E-W. By default, the Cayman 2E-W is associated with 
the public community. You can associate as many as 16 communities 
with the Cayman 2E-W.

set snmp traps authentication-traps { on | off } 

Enables or disables SNMP trapping. If SNMP trapping is enabled, 
your Cayman 2E-W sends authentication traps to all SNMP trap 
destinations. You must enable trap authentication before you set up 
your trap destinations.

set snmp traps ip-traps ip-address [ community 

community-name ] 

Identifies the destination for SNMP trap messages. The 

 

argument is the IP address of the host acting as an SNMP console. 
The optional 

community

 

 identifies the name of the 

Cayman 2E-W community, which is included in the trap message the 
device sends to the management console. This name, which is not 
used for authentication, does not have to match a predefined 
community name.

set snmp sysgroup contact contact_info

Identifies the system contact, such as the name, phone number, 
beeper number, or email address of the person responsible for the 
Cayman 2E-W. You can enter up to 256 characters for the 

 argument. You must put the 

 argument 

in double-quotes if it contains embedded spaces.

set snmp sysgroup location location_info

Identifies the location, such as the building, floor, or room number, 
of the Cayman 2E-W. You can enter up to 256 characters for the 

 argument. You must put the 

 

argument in double-quotes if it contains embedded spaces.